Cisco Cisco 4100 Series Wireless LAN Controller Referências técnicas

 

config wlan security wpa encryption

config wlan security static-wep-key authentication

To change the status of static WEP key authentication, use the config wlan security static-wep-key 
authentication command.

config

Configure parameters.

wlan

Wireless LAN parameters.

security

Security policy.

static-wep-key

Static WEP key authentication.

authentication

Authentication setting.

shared-key

Shared-key authentication.

open

Open authentication.

<WLAN id>

WLAN identifier between 1 and 16.

N/A

>config wlan security static-wep-key authentication shared-key 1
>config wlan security static-wep-key authentication open 1

show wlan

config wlan security static-wep-key encryption

To change the status of static WEP key encryption, use the config wlan security static-wep-key encryp-
tion command.
Use to enable or disable static wep key encryption. Static WEP encryption parameters:

 - Key sizes: 40/64, 104/128 and 128/152 bit key sizes.
 - Key Index: 1 to 4.
 - Enter encryption key.
 - Select encryption key format in ASCII or HEX.

One unique WEP Key Index can be applied to each WLAN. As there are only four WEP Key Indexes, only 
four WLANs can be configured for Static WEP Layer 2 encryption.

config

Configure parameters.

wlan

Wireless LAN parameters.

security

Security policy.

static-wep-key

Static WEP key authentication.

encryption

Encryption setting.

<WLAN id>

WLAN identifier between 1 and 16.

[40/104/128]

Encryption level.

hex/ascii

Key format

<key>

Hex or ASCII key

<key-index>

Key index

N/A