Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
trapflags client
To enable the sending of client-related DOT11 traps, use the trapflags client command. To disable the sending
of client-related DOT11 traps, use the no form of this command.
of client-related DOT11 traps, use the no form of this command.
trapflags client [dot11 {assocfail| associate| authfail| deauthenticate| disassociate}| excluded]
no trapflags client [dot11 {assocfail| associate| authfail| deauthenticate| disassociate}| excluded]
Syntax Description
Client-related DOT11 traps.
dot11
Enables the sending of Dot11 association fail traps to clients.
assocfail
Enables the sending of Dot11 association traps to clients.
associate
Enables the sending of Dot11 authentication fail traps to clients.
authfail
Enables the sending of Dot11 deauthentication traps to clients.
deauthenticate
Enables the sending of Dot11 disassociation traps to clients.
disassociate
Enables the sending of excluded trap to clients.
excluded
Command Default
None
Command Modes
Privileged EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to enable the sending of Dot11 disassociation trap to clients:
Controller#
configure terminal
Controller(config)#
trapflags client dot11 disassociate
Controller(config)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
115
trapflags client