Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
debug qos-manager
To enable debugging of the quality of service (QoS) manager software, use the debug qos-manager command
in privileged EXEC mode. Use the no form of this command to disable debugging.
in privileged EXEC mode. Use the no form of this command to disable debugging.
debug qos-manager {all| event| verbose}
no debug qos-manager {all| event| verbose}
Syntax Description
Display all QoS-manager debug messages.
all
Display QoS-manager related-event debug messages.
event
Display QoS-manager detailed debug messages.
verbose
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
The undebug qos-manager command is the same as the no debug qos-manager command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable debugging
on a stack member, you can start a session from the stack master by using the session switch-number privileged
EXEC command. Then enter the debug command at the command-line prompt of the stack member. You
also can use the remote command stack-member-number LINE privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
on a stack member, you can start a session from the stack master by using the session switch-number privileged
EXEC command. Then enter the debug command at the command-line prompt of the stack member. You
also can use the remote command stack-member-number LINE privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
Related Commands
Description
Command
Displays information about the types of debugging
that are enabled.
that are enabled.
show debugging
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
142
OL-29471-01
debug qos-manager