Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
service-policy (WLAN)
To configure the WLAN quality of service (QoS) service policy, use the service-policy command. To disable
a QoS policy on a WLAN, use the no form of this command.
a QoS policy on a WLAN, use the no form of this command.
service-policy [client] {input| output} policy-name
no service-policy [client] {input| output} policy-name
Syntax Description
(Optional) Assigns a policy map to all clients in the WLAN.
client
Assigns an input policy map.
input
Assigns an output policy map.
output
Policy name.
policy-name
Command Default
No policies are assigned and the state assigned to the policy is None.
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to configure the input QoS service policy on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
service-policy input policy-test
This example shows how to disable the input QoS service policy on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no service-policy input policy-test
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
168
OL-29471-01
service-policy (WLAN)