Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
wireless peer-blocking forward-upstream
To configure peer-to-peer blocking for forward upstream, use the wireless peer-blocking forward-upstream
command. To remove a peer-to-peer blocking, use the no form of the command.
command. To remove a peer-to-peer blocking, use the no form of the command.
wireless peer-blocking forward-upstream interface{GigabitEthernet interface-number TenGigabitEthernet
interface-number}
interface-number}
no wireless peer-blocking forward-upstream {GigabitEthernet interface-number TenGigabitEthernet
interface-number}
interface-number}
Syntax Description
The Gigabit Ethernet interface number. Values range from 0 to 9.
GigabitEthernet interface
The 10-Gigabit Ethernet interface number. Values range from 0 to 9.
TenGigabitEthernet interface
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to configure peer-to-peer blocking for interface 10-gigabit ethernet interface:
Controller(config)#
wireless peer-blocking forward-upstream TenGigabitEthernet 1/1/4
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
255
wireless peer-blocking forward-upstream