Cisco Cisco 5760 Wireless LAN Controller Referências técnicas

Página de 1016
ip igmp snooping querier
To globally enable the Internet Group Management Protocol (IGMP) querier function in Layer 2 networks,
use the ip igmp snooping querier global configuration command on the controller stack or on a standalone
controller . Use the command with keywords to enable and configure the IGMP querier feature on a VLAN
interface. To return to the default settings, use the no form of this command.
ip igmp snooping [vlan vlan-idquerier [address ip-address max-response-time response-time |
query-interval interval-count tcn query {count count interval interval} | timer expiry expiry-time |
version version]
no ip igmp snooping [vlan vlan-idquerier [address max-response-time query-interval tcn query
{count interval} | timer expiry expiry-time version]
Syntax Description
(Optional) Enables IGMP snooping and the IGMP querier function on
the specified VLAN. The range is 1 to 1001 and 1006 to 4094.
vlan vlan-id
(Optional) Specifies a source IP address. If you do not specify an IP
address, the querier tries to use the global IP address configured for the
IGMP querier.
address ip-address
(Optional) Sets the maximum time to wait for an IGMP querier report.
The range is 1 to 25 seconds.
max-response-time
response-time
(Optional) Sets the interval between IGMP queriers. The range is 1 to
18000 seconds.
query-interval interval-count
(Optional) Sets parameters related to Topology Change Notifications
(TCNs).
tcn query
Sets the number of TCN queries to be executed during the TCN interval
time. The range is 1 to 10.
count count
Sets the TCN query interval time. The range is 1 to 255.
interval interval
(Optional) Sets the length of time until the IGMP querier expires. The
range is 60 to 300 seconds.
timer expiry expiry-time
(Optional) Selects the IGMP version number that the querier feature uses.
Select 1 or 2.
version version
Command Default
The IGMP snooping querier feature is globally disabled on the controller.
When enabled, the IGMP snooping querier disables itself if it detects IGMP traffic from a multicast-enabled
device.
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)    
   OL-29471-01
313
ip igmp snooping querier