Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
chd
To enable coverage hole detection on a WLAN, use the chd command. To disable coverage hole detection,
use the no form of this command.
use the no form of this command.
chd
no chd
Syntax Description
This command has no keywords or arguments.
Command Default
Coverage hole detection is enabled.
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
Examples
This example shows how to enable coverage hole detection on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
chd
Controller(config-wlan)#
end
This example shows how to disable coverage hole detection on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no chd
Controller(config-wlan)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
530
OL-29471-01
chd