Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
ccx aironet-iesupport
To enable Aironet Information Elements (IEs) for a WLAN, use the ccx aironet-iesupport command. To
disable Aironet Information Elements (IEs), use the no form of this command.
disable Aironet Information Elements (IEs), use the no form of this command.
ccx aironet-iesupport
no ccx aironet-iesupport
Syntax Description
This command has no keywords or arguments.
Command Default
Aironet IE support is enabled.
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to enable an Aironet IE for a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
ccx aironet-iesupport
Controller(config-wlan)#
end
This example shows how to disable an Aironet IE on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no ccx aironet-iesupport
Controller(config-wlan)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
533
ccx aironet-iesupport