Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
load-balance
To enable load balancing on a WLAN, use the load-balance command. To disable load balancing, use the
no form of this command.
no form of this command.
load-balance
no load-balance
Syntax Description
This command has no keywords or arguments.
Command Default
Load balancing is disabled by default.
Command Modes
wlan
Command History
Modification
Release
The command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to enable load balancing on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
shutdown
Controller(config)#
wlan wlan1
Controller(config-wlan)#
load-balance
Controller(config)#
no shutdown
Controller(config-wlan)#
end
This example shows how to disable load balancing on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
shutdown
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no load-balance
Controller(config)#
no shutdown
Controller(config-wlan)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
545
load-balance