Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
roamed-voice-client re-anchor
To enable the roamed-voice-client re-anchor feature, use the roamed-voice-client re-anchor command. To
disable the roamed-voice-client re-anchor feature, use the no form of this command.
disable the roamed-voice-client re-anchor feature, use the no form of this command.
roamed-voice-client re-anchor
no roamed-voice-client re-anchor
Syntax Description
This command has no keywords or arguments.
Command Default
Roamed voice client reanchor feature is disabled.
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to enable the roamed voice client re-anchor feature:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
roamed-voice-client re-anchor
This example shows how to disable the roamed voice client re-anchor feature:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no roamed-voice-client re-anchor
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
551
roamed-voice-client re-anchor