Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
ap dot11 rrm channel
To enable radio resource management channel for 2.4 GHz and 5GHz devices, use the ap dot11 rrm channel
command. To disable the radio resource mangement for 2.4 GHz and 5 GHz devices, use the no form of the
command.
command. To disable the radio resource mangement for 2.4 GHz and 5 GHz devices, use the no form of the
command.
ap dot11 {24ghz| 5ghz} rrm channel {cleanair-event| dca| device| foreign| load| noise}
no ap dot11 {24ghz| 5ghz} rrm channel {cleanair-event| dca| device| foreign| load| noise}
Syntax Description
Specifies the cleanair event-driven RRM parameters
cleanair-event
Specifies the 802.11 dynamic channel assignment algorithm parameters
dca
Specifies the persistent non-WiFi device avoidance in the 802.11-channel
assignment.
assignment.
device
Enables foreign AP 802.11-interference avoidance in the channel assignment.
foreign
Enables Cisco AP 802.11-load avoidance in the channel assignment.
load
Enables non-802.11-noise avoidance in the channel assignment.
noise
Command Default
None.
Command Modes
Interface configuration.
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None.
Examples
This example shows all the parameters available for Channel.
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
ap dot11 24ghz rrm channel ?
cleanair-event
Configure cleanair event-driven RRM parameters
dca
Config 802.11b dynamic channel assignment algorithm
parameters
parameters
device
Configure persistent non-WiFi device avoidance in the 802.11b
channel assignment
channel assignment
foreign
Configure foreign AP 802.11b interference avoidance in the
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
574
OL-29471-01
ap dot11 rrm channel