Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
ap dot11 rrm profile
To configure Cisco lightweight access point profile settings on supported 802.11 networks, use the ap dot11
rrm profile command.
rrm profile command.
ap dot11 {24ghz| 5ghz} rrm profile {customize| foreign value| noise value| throughput value| utilization
value}
value}
Syntax Description
Enables performance profiles.
customize
Specifies the 802.11 foreign 802.11 interference threshold value. The range
is between 0 and 100 percent.
is between 0 and 100 percent.
foreign value
Specifies the 802.11 foreign noise threshold value. The range is between
-127 and 0 dBm
-127 and 0 dBm
noise value
Specifies the 802.11a Cisco AP throughput threshold value. The range is
between 1000 and 10000000 bytes per second
between 1000 and 10000000 bytes per second
throughput value
Specifies the 802.11a RF utilization threshold value. The range is between
0 and 100 percent
0 and 100 percent
utilization value
Command Default
Disabled.
Command Modes
Interface configuration.
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None.
Examples
This example shows how to set the threshold value for the noise parameter.
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
ap dot11 5ghz rrm profile noise -50
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
581
ap dot11 rrm profile