Cisco Cisco 5760 Wireless LAN Controller Referências técnicas

ap dot11 5ghz channelswitch mode

To configure a 802.11h channel switch announcement, use the ap dot11 5ghz channelswitch mode command.
To disable a 802.11h channel switch announcement, use the no form of this command.

ap dot11 5ghz channelswitch mode value

no ap dot11 5ghz channelswitch mode

Syntax Description

802.11h channel announcement value.

You can specify anyone of the following two values:

Note

• 0—Indicates that the channel switch announcement is

disabled.

• 1—Indicates that the channel switch announcement is

enabled.

value

Command Default

None

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

Cisco IOS XE 3.2SE

Examples

This example shows how to enable the 802.11h switch announcement:

Controller(config)#

ap dot11 5ghz channelswitch mode 1

Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)

OL-29471-01

611

ap dot11 5ghz channelswitch mode