Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
802.11 RF utilization threshold from 0 to 100 percent.
The default is 80
percent.
percent.
Note
value
Command Default
None
Command Modes
Any command mode
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to set the AP1 clients threshold to 75 clients:
Controller#
ap name AP1 dot11 49ghz rrm profile clients 75
This example shows how to turn performance on profile customization for Cisco lightweight access point
AP1 on the 4.9 GHz channel:
AP1 on the 4.9 GHz channel:
Controller#
ap name AP1 dot11 49ghz rrm profile customize
This example shows how to set the foreign transmitter interference threshold for AP1 to 0 percent:
Controller#
ap name AP1 dot11 49ghz rrm profile foreign 0
This example shows how to set the foreign noise threshold for AP1 to 0 dBm:
Controller#
ap name AP1 dot11 49ghz rrm profile noise 0
This example shows how to set the AP1 data-rate threshold to 10000000 bytes per second:
Controller#
ap name AP1 dot11 49ghz rrm profile throughput 10000000
This example shows how to set the RF utilization threshold for AP1 to 100 percent:
Controller#
ap name AP1 dot11 49ghz rrm profile utilization 100
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
675
ap name dot11 49ghz rrm profile