Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
ap name led
To enable the LED state for an access point, use the ap name led command. To disable the LED state for
an access point, use the no form of this command.
an access point, use the no form of this command.
ap name ap-name led
no ap name ap-name [led] led
Syntax Description
Name of the Cisco lightweight access point.
ap-name
Enables the access point’s LED state.
led
Command Default
None
Command Modes
Any command mode
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to enable the LED state for an access point:
Controller#
ap name AP2 led
This example shows how to disable the LED state for an access point:
Controller#
ap name AP2 no led
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
691
ap name led