Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
ap tftp-downgrade
To configure the settings used for downgrading a lightweight access point to an autonomous access point,
use the ap tftp-downgrade command. To disable the settings used for downgrading a lightweight access
point to an autonomous access point, use the no form of this command.
use the ap tftp-downgrade command. To disable the settings used for downgrading a lightweight access
point to an autonomous access point, use the no form of this command.
ap tftp-downgrade tftp-server-ip filename
no ap tftp-downgrade
Syntax Description
IP address of the TFTP server.
tftp-server-ip
Filename of the access point image file on the TFTP server.
filename
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to configure the settings for downgrading all access points:
Controller(config)#
ap tftp-downgrade 172.21.23.45 ap3g1-k9w7-tar.124-25d.JA.tar
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
734
OL-29471-01
ap tftp-downgrade