Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
show ap dot11 l2roam
To display 802.11a or 802.11b/g Layer 2 client roaming information, use the show ap dot11 l2roam
command.
command.
show ap dot11 {24ghz| 5ghz} l2roam {mac-address mac-address statistics| rf-param| statistics}
Syntax Description
Specifies the 2.4 GHz band.
24ghz
Specifies the 5 GHz band.
5ghz
Specifies the MAC address of a Cisco lightweight access point.
mac-address mac-address statistics
Specifies the Layer 2 frequency parameters.
rf-param
Specifies the Layer 2 client roaming statistics.
statistics
Command Default
None
Command Modes
Any command mode
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to display 802.11b Layer 2 client roaming information:
Controller#
show ap dot11 24ghz l2roam rf-param
L2Roam 802.11bg RF Parameters
Config Mode
: Default
Minimum RSSI
: -85
Roam Hysteresis
: 2
Scan Threshold
: -72
Transition time
: 5
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
750
OL-29471-01
show ap dot11 l2roam