Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
show ap name dot11
To display 802.11a or 802.11b configuration information that corresponds to specific Cisco lightweight access
points, use the show ap name dot11 command.
points, use the show ap name dot11 command.
show ap name ap-name dot11 {24ghz| 5ghz} {ccx| cdp| profile| service-poicy output| stats| tsm {all|
client-mac}}
client-mac}}
Syntax Description
Name of the Cisco lightweight access point.
ap-name
Displays the 2.4 GHz band.
24ghz
Displays the 5 GHz band.
5ghz
Displays the Cisco Client eXtensions (CCX) radio management status
information.
information.
ccx
Displays Cisco Discovery Protocol (CDP) information.
cdp
Displays configuration and statistics of 802.11 profiling.
profile
Displays downstream service policy information.
service-policy output
Displays Cisco lightweight access point statistics.
stats
Displays 802.11 traffic stream metrics statistics.
tsm
Displays the list of all access points to which the client has associations.
all
MAC address of the client.
client-mac
Command Default
None
Command Modes
Any command mode
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to display the service policy that is associated with the access point:
Controller#
show ap name test-ap dot11 24ghz service-policy output
Policy Name
: test-ap1
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
789
show ap name dot11