Cisco Cisco 4402 Wireless LAN Controller

Issues Corrected in this Release

•

11817 - Individual ports failed after upgrade. 

•

13441 - Added new mobility roles in the MIB and Cisco WCS.

•

13887 - Added 3.0 Bridging & Security MIBs.

•

13931 - Added Web User Interface support for 'multiple AP management interfaces'.

•

13951 - The 'show run-config' received incomplete or stripped results.

•

14139 - Cisco 4400 Series Wireless LAN Controller inter-NPU data path was not working.

•

14379 - Cisco 1000 Series lightweight access points crashed when fragmentation was changed 
from default.

•

14388 - L2TP client failed to connect.

•

14391 - Provided external Web Auth configuration options including multiple web server IPs 
using the Web User Interface.

•

14475 - RADIUS per WLAN was not working; client was using the Default server.

•

14485 - Added support for “database size” to store MAC filtering entries.

•

14499 - RADIUS fallback did not work after clearing per-WLAN RADIUS.

•

14526 - Switch running 2.2.127.4 and terminating IPSec crashed.

•

14529 - Now able to configure auto-anchor switch using the Web User Interface.

•

14545 - Added a command to configure the 802.11e max bandwidth to Web User Interface and 
Cisco WCS.

•

14551 - Added command to configure the 802.11e max bandwidth to SNMP/Cisco WCS.

•

14564 - SNMP did not return all mobility group members for similar MAC patterns.

•

14579 - Now able to set WPA/WPA2 security when web passthrough is set.

•

14604 - One port allowed 49 access points to associate.

•

14646 - Changed error reported on deleting WLAN with anchors configured.

•

14665 - Can now set bhrate and bhmode.

•

14726 - Added Web User Interface changes for Link Test in Bridging and Beacon.

•

14728 - Client could not ping anchor Management IP on Cisco 2000 Series Wireless LAN 
Controller.

•

14764 - Wireless Routing Access Point could not join non-bridge Cisco Wireless LAN Controllers.

•

14797 - Cisco Wireless LAN Controller was allowed to configure itself as auto-anchor only if it is 
added first.

•

14802 - MAC filtering failed for Cisco 1030 remote edge lightweight access points.

•

14831 - Wireless Routing Access Point crashed with no spam config and when RRM is enabled 
on backhaul.

•

14833 - Cisco 4400 Series Wireless LAN Controller reported wrong error message when 
enabling IPsec without VPN/Enhanced Security Module.

•

14842 - Now able to disable radio or network for Cisco 1000 Series lightweight access points.

•

14844 - The code now allows mobility anchor creation when Layer3 security enabled on WLAN.