Cisco Cisco 5760 Wireless LAN Controller
33
Release Notes for Cisco 5760 Controller, Cisco IOS XE Release 3.2.xSE
OL-28114-04
Documentation Updates
police cir 10000000 bc 8000 be 8000
conform-action transmit
exceed-action set-dscp-transmit dscp table policed-dscp
violate-action drop
•
CSCuh21506
When the switch is in VTP client mode, all broadcast traffic is blocked for a given VLAN when a
vtp prune event is immediately followed by a re-join event. ARP does not complete and
consequently MAC addresses on upstream devices are not learned.
vtp prune event is immediately followed by a re-join event. ARP does not complete and
consequently MAC addresses on upstream devices are not learned.
The workaround is to set the VTP mode to transparent.
Caveats Resolved in Cisco IOS XE Release 3.2.1SE
•
CSCue76684
In certain boot sequences, the BOOT variable is removed from the switch. At the next reboot
attempt, the reboot fails, and the switch remains in the bootloader prompt.
attempt, the reboot fails, and the switch remains in the bootloader prompt.
The workaround is to:
–
Boot the switch with boot flash:file_name command.
or
–
Set the BOOT variable explicitly in the bootloader using BOOT=flash:file_name and, then boot
the switch using boot command.
the switch using boot command.
Documentation Updates
System Management Configuration Guide, Cisco IOS XE Release 3SE (Cisco
WLC 5700 Series)
WLC 5700 Series)
Configuring Fast SSID Changing
When the client sends a new association for a different SSID and fast SSID changing is disabled, the
client entry in the controller connection table is cleared before the client is added to the new SSID. This
means that the controller enforces a delay before clients are allowed to move to a new SSID. When fast
SSID changing is enabled, there is no delay, and clients move more quickly from one SSID to another.
client entry in the controller connection table is cleared before the client is added to the new SSID. This
means that the controller enforces a delay before clients are allowed to move to a new SSID. When fast
SSID changing is enabled, there is no delay, and clients move more quickly from one SSID to another.
Beginning in privileged EXEC mode, follow these steps to configure fast SSID changing:
Command
Purpose
Step 1
configure terminal
Example:
Controller# configure terminal
Enters global configuration mode.