Cisco Cisco 4404 Wireless LAN Controller Referências técnicas

Deployment Guide: Cisco Guest Access Using the Cisco Wireless LAN Controller, Release 4.0

OL-11010-01

Web Authentication Process

Figure 23

WLANs > Edit Page

Step 2

Select the appropriate IP address from the Radius Servers drop-down menu.

Note

The IP address for the RADIUS server is entered during initial setup of the controller using the
configuration wizard.

Step 3

Click Save Configuration.

To enable an external RADIUS server to authenticate traffic using CLI, follow these steps:

Step 1

Enter config radius auth ip-address to configure a RADIUS server for authentication.

Step 2

Enter config radius auth port to specify the UDP port for authentication.

Step 3

Enter config radius auth secret to configure the shared secret.

Step 4

Enter config radius auth enable to enable authentication.

Note

Authentication is disabled by default.

Step 5

Enter config radius acct disable to disable authentication.