Cisco Cisco Clean Access 3.5
5-9
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 5 Configuring DHCP
Configuring IP Ranges (IP Address Pools)
Note
When adding a managed subnet, the IP Address field you configure should be the gateway address for
the subnet—that is, the address used by the Clean Access Server to route the subnet. (Not the network
address, which the Clean Access Manager calculates by applying the subnet mask to the gateway
address.)
the subnet—that is, the address used by the Clean Access Server to route the subnet. (Not the network
address, which the Clean Access Manager calculates by applying the subnet mask to the gateway
address.)
Create Auto-Generated Subnet
1.
Go to Device Management > CCA Servers > Manage [CAS_IP] > Network > DHCP >
Auto-Generate. The Auto-Generate pane appears as follows:
Auto-Generate. The Auto-Generate pane appears as follows:
Figure 5-6
DHCP—Auto-Generate Subnet Form
2.
In the Start Generating at IP field, type the first IP address of the range to be generated:
Auto-Generate tab