Cisco Cisco Email Security Appliance C170 Referências técnicas

Do you want to use the "Received:" header or a custom header to determine the originating 

IP address?

1. Use "Received:" header

2. Use a custom header

[1]> 2

Enter the custom header name that contains the originating IP address:

[]> x-Connecting-IP

There are 2 relays defined.

Choose the operation you want to perform:

- NEW - Create a new entry

- EDIT - Modify an entry

- DELETE - Remove an entry

- PRINT - Display the table

[]> print

Incoming                                      Header          Match

relay name:    IP address:                    to parse:       after:      Hops:

-----------    -----------                    ---------       ------      -----

first-hop      192.168.1.1                    Received        [           1

second-hop     192.168.1.2                    x-Connecting-IP n/a         n/a

There are 2 relays defined.

Choose the operation you want to perform:

- NEW - Create a new entry

- EDIT - Modify an entry

- DELETE - Remove an entry

- PRINT - Display the table

[]> delete

1. first-hop:      192.168.1.1

2. second-hop:     192.168.1.2

Enter the number of the entry you wish to delete:

[1]> 1

Incoming relay "first-hop" deleted.

There is 1 relay defined.

Choose the operation you want to perform:

- NEW - Create a new entry

- EDIT - Modify an entry

- DELETE - Remove an entry

- PRINT - Display the table

[]>

Configure End-User Safelist/Blocklist.

Safelists/Blocklists must be enabled on the appliance via the GUI in order to run this command.