Cisco Cisco Email Security Appliance C170 Referências técnicas

To test the configuration, you can use the 

mailconfig

 command immediately to send a test email 

containing the system configuration data you just created with the 

systemsetup

 command.

Commit: This command does not require a ‘commit’.

Cluster Management: This command can be used in all three machine modes (cluster, group, machine).

Batch Command: This command does not support a batch format

mail.example.com> mailconfig

Please enter the email address to which you want to send the configuration file.

Separate multiple addresses with commas.

[]> user@example.com

Choose the passphrase option:

1. Mask passphrases (Files with masked passphrases cannot be loaded using loadconfig 

command)

2. Encrypt passphrases

3. Plain passphrases

[1]> 2

The configuration file has been sent to user@example.com.

Send the configuration to a mailbox to which you have access to confirm that the system is able to send 
email on your network.

When physically transferring the appliance, you may want to start with factory defaults. The 
r

esetconfig

 command resets all configuration values to factory defaults. This command is extremely 

destructive, and it should only be used when you are transferring the unit or as a last resort to solving 
configuration issues. It is recommended you run the 

systemsetup

 command after reconnecting to the 

CLI after you have run the 

resetconfig

 command. 

The 

resetconfig

 command only works when the appliance is in the offline state. When the 

resetconfig

 

command completes, the appliance is automatically returned to the online state, even before you run the 

systemsetup

 command again. If mail delivery was suspended before you issued the 

resetconfig

 

command, the mail will attempt to be delivered again when the 

resetconfig

 command completes.