Cisco Cisco Email Security Appliance C170 Referências técnicas

Routes consist of a nickname (for future reference), a destination, and a gateway. A gateway (the next 
hop) is an IP address such as 

10.1.1.2

. The destination can be one of two things:

an IP address, such as 

192.168.14.32

a subnet using CIDR notation. For example, 

192.168.5.0/24

 means the entire class C network from 

192.168.5.0

 to 

192.168.5.255

. 

For IPv6 addresses, you can use the following formats:

2620:101:2004:4202::0-2620:101:2004:4202::ff

2620:101:2004:4202::

2620:101:2004:4202::23

2620:101:2004:4202::/64

The command presents a list of all currently configured TCP/IP routes for you to select from using the 

edit

 and 

delete

 subcommands. 

Commit: This command requires a ‘commit’.

Cluster Management: This command is restricted to machine mode.

Batch Command: This command supports a batch format.

The batch format of the 

smtproutes

 command can be used to perform all the fuctions of the traditional 

CLI command. You can choose whether to use IPv4 or IPv6 addresses for the route.

Creating a static route:

Editing a static route:

routeconfig new 4|6 <name> <destination_address> <gateway_ip>

The IP version (IPv4 or IPv6) to apply this command 
to. For 

clear

 and 

print

 this option can be omitted 

and the command applies to both versions.

The name of the route.

The IP or CIDR address to match on for outgoing IP 
traffic.

 The IP address to send this traffic to.

routeconfig edit 4|6 <name> <new_name> <destination_address> 

<gateway_ip>