Cisco Cisco Email Security Appliance C370D Referências técnicas

clusterconfig join [--port=xx] <ip_of_remote_cluster> [<admin_password>]<groupname> 

— 

This will add this machine to a cluster.

<ip_of_remote_cluster>

 - The IP address of another machine in the cluster.

<admin_password >

- The admin password of the cluster.  This should not be

                     specified if joining over CCS.

<groupname>

 - The name of the group to join.

<port>

 - The port of the remote machine to connect to (defaults to 22).

clusterconfig prepjoin print

This will display the information needed to prepare the joining of this machine to a cluster over a CCS 
port.

The following commands are available when you are in a cluster.

clusterconfig addgroup <groupname> — 

Creates a new cluster group.  The group starts off with 

no members.

clusterconfig renamegroup <old_groupname> <new_groupname> — 

Change the name of a cluster 

group.

clusterconfig deletegroup <groupname> [new_groupname] — 

Remove a cluster group.

<groupname>

 - Name of the cluster group to remove.

<new_groupname>

 - The cluster group to put machines of the old group into.

clusterconfig setgroup <machinename> <groupname> — 

Sets (or changes) which group a 

machine is a member of.

<machinename

> - The name of the machine to set.

<groupname>

 - The group to set the machine to.

clusterconfig removemachine <machinename> — 

Remove a machine from the cluster.

clusterconfig setname <name> — 

Changes the name of the cluster to the given name.

clusterconfig list — 

Display all the machines currently in the cluster.

clusterconfig connstatus — 

Display all the machines currently in the cluster and add routing 

details for disconnected machines.

clusterconfig disconnect <machinename> — 

This will temporarily detach a machine from the 

cluster.

<machinename>

 - The name of the machine to disconnect.

clusterconfig reconnect <machinename> - 

This will restore connections with machines that 

were detached with the “disconnect” command.

clusterconfig prepjoin new <serial_number> <hostname> <user_key> — 

This will add a new 

host that is to join the cluster over the CCSport.

<serial_number>

 - The serial number of the machine being added.

<hostname>

 - The host name of the machine being added.