Cisco Cisco Email Security Appliance C170 Referências técnicas

Commit: This command requires a ‘commit’.

Cluster Management: This command can be used in all three machine modes (cluster, group, machine).

Batch Command: This command does not support a batch format

mail.example.com>imageanalysisconfig

IronPort Image Analysis: Enabled

Image Analysis Sensitivity: 65

Verdict Ranges: Clean (0-49), Suspect(50-74), Inappropriate (75+)

Skip small images with size less than 100 pixels (width or height)

Choose the operation you want to perform:

- SETUP - Configure IronPort Image Analysis.

[]> setup

IronPort Image Analysis: Enabled

Would you like to use IronPort Image Analysis? [Y]>

Define the image analysis sensitivity. Enter a value between 0 (least sensitive) and 100 

(most sensitive). As sensitivity increases, so does the false

positive rate. The default setting of 65 is recommended.

[65]>

Define the range for a CLEAN verdict. Enter the upper bound of the CLEAN range by entering 

a value between 0 and 98. The default setting of 49 is

recommended.

[49]>

Define the range for a SUSPECT verdict. Enter the upper bound of the SUSPECT range by 

entering a value between 50 and 99. The default setting of 74 is

recommended.

[74]>

Would you like to skip scanning of images smaller than a specific size? [Y]>

Please enter minimum image size to scan in pixels, representing either height or width of 

a given image.

[100]>

IronPort Image Analysis: Enabled

Image Analysis Sensitivity: 65

Verdict Ranges: Clean (0-49), Suspect(50-74), Inappropriate (75+)

Skip small images with size less than 100 pixels (width or height)

Choose the operation you want to perform:

- SETUP - Configure IronPort Image Analysis.

[]>