Cisco Cisco Email Security Appliance C170 Referências técnicas

Choose the operation you want to perform:

- NEW - Create a new route.

[]> new

Please create a name for the route:

[]> EuropeIPv6Net

Please enter the destination IPv6 address to match on.

CIDR addresses such as 2001:db8::/32 are also allowed.

[]>  2620:101:2004:4202::/6

Please enter the gateway IP address for traffic to 2620:101:2004:4202::/6:

[]> 2620:101:2004:4202::23

Currently configured routes:

1. EuropeIPv6Net Destination: 2620:101:2004:4202::/6 Gateway:

2620:101:2004:4202::23

Choose the operation you want to perform:

- NEW - Create a new route.

- EDIT - Modify a route.

- DELETE - Remove a route.

- CLEAR - Clear all entries.

[]> 

The 

setgateway

 command configures the default next-hop intermediary through which packets should 

be routed. Alternate (non-default) gateways are configured using the 

routeconfig

 command.

Commit: This command requires a ‘commit’.

Cluster Management: This command can be used in all three machine modes (cluster, group, machine).

Batch Command: This command does not support a batch format.

mail3.example.com> setgateway 

Warning: setting an incorrect default gateway may cause the current connection to be 

interrupted when the changes are committed.

Enter new default gateway:

[10.1.1.1]> 192.168.20.1

mail3.example.com> commit

Please enter some comments describing your changes:

[]> changed default gateway to 192.168.20.1

Do you want to save the current configuration for rollback? [Y]> n

Changes committed: Fri May 23 11:42:12 2014 GMT