Cisco Cisco Email Security Appliance C170 Referências técnicas
3-94
Cisco AsyncOS 8.5.6 CLI Reference Guide
Chapter 3 The Commands: Reference Examples
General Management/Administration/Troubleshooting
diagnostic
Description
The diagnostic command is used to check RAID disks, view and clear cache information, and to test
connectivity to other mail servers.
connectivity to other mail servers.
Using the diagnostic Command
The following commands are available within the
diagnostic
submenu:
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode. It is further restricted to the login
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
Batch Command: This command supports a batch format.
Batch Format
The batch format of the diagnostic command can be used to check RAID status, clear caches and show
the contents of the ARP cache. To invoke as a batch command, use the following formats:
the contents of the ARP cache. To invoke as a batch command, use the following formats:
•
Check the RAID status
•
Clear the LDAP, DNS and ARP caches
Table 3-43
diagnostic
Subcommands
Option
Sub commands
Availability
RAID
1. Run disk verify
Available on C30 and C60 only.
2. Monitor tasks in
progress
progress
3. Display disk verify
verdict
verdict
NETWORK
FLUSH
C-, X-, and M-Series
ARPSHOW
SMTPPING
TCPDUMP
diagnostic raid
diagnostic network flush