Cisco Cisco Email Security Appliance C170 Referências técnicas

Restart the appliance.

Commit: This command does not require a ‘commit’.

Cluster Management: This command is restricted to machine mode.

Batch Command: This command does not support a batch format.

Configure the ability to remotely reset power to the appliance chassis using a third-party Intelligent 
Platform Management Interface (IPMI) tool that supports version 2.0. The following IPMI commands 
are supported: 

status, on, off, cycle, reset, diag, soft

. 

This command runs only on the following hardware: C380 and C680, M380 and M680, and S380 and 
S680. 

You will need a dedicated IPv4 address for the Remote Power Management interface. This interface is 
configurable only via the 

remotepower

 command; it cannot be configured using the 

ipconfig

 command. 

The username and password that you specify with this command will be required in order to remotely 
reset appliance power. 

mail3.example.com> reboot

Enter the number of seconds to wait before abruptly closing connections.

[30]>

Waiting for listeners to exit...

Receiving suspended.

Waiting for outgoing deliveries to finish...

Mail delivery suspended.