Cisco Cisco Email Security Appliance C190 Guia Da Instalação
7
–
Default Gateway: 192.168.42.1
Step 9
Click OK and Close to exit the dialog box.
For Mac
The exact steps depend on your operating system version.
Step 1
Launch the Apple menu and choose System Preferences.
Step 2
Click Network.
Step 3
Click the lock icon to allow changes.
Step 4
Select the Ethernet network configuration with the
green icon. This is your active connection. Then click
Advanced.
green icon. This is your active connection. Then click
Advanced.
Step 5
Click the TCP/IP tab and from Ethernet settings,
choose Manually from the drop-down list.
choose Manually from the drop-down list.
Step 6
Enter the following changes:
–
IP Address: 192.168.42.43
–
Subnet Mask: 255.255.255.0
–
Router: 192.168.42.1
Step 7
Click OK.
8
Connect to the Appliance
The Cisco C690 appliances have five gigabit network ports and
a Management port, as shown in the figure on the following
page . At least one static IP address is required to send and
receive email.
a Management port, as shown in the figure on the following
page . At least one static IP address is required to send and
receive email.
You can receive and deliver email from a single connection to
either network port if your network topology dictates it. Two IP
addresses can be configured on one network interface.
either network port if your network topology dictates it. Two IP
addresses can be configured on one network interface.
Or, you can connect the Data 1 network port to your public
network and connect the Data 2 network port to your private
network.
network and connect the Data 2 network port to your private
network.