Cisco Cisco NAC Appliance 3390 Guia De Resolução De Problemas
Cisco NAC Appliance (Clean Access) 4.x:
Configure the Syslog Settings for Events
Configure the Syslog Settings for Events
Document ID: 91899
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Interpreting Event Logs
View Logs
Event Log Example
Limit the Number of Logged Events
Configure Syslog Logging
Log Files
Related Information
Prerequisites
Requirements
Components Used
Conventions
Interpreting Event Logs
View Logs
Event Log Example
Limit the Number of Logged Events
Configure Syslog Logging
Log Files
Related Information
Introduction
This document describes how to configure the syslog settings in order to log the events to an external server in
the Cisco Network Admission Control (NAC) Appliance, formerly known as Cisco Clean Access (CA).
the Cisco Network Admission Control (NAC) Appliance, formerly known as Cisco Clean Access (CA).
Prerequisites
Requirements
This document assumes the Cisco Clean Access Manager (CAM) and Cisco Clean Access Servers (CAS) are
installed and work properly.
installed and work properly.
Components Used
The information in this document is based on the Cisco NAC Appliance that runs software version 4.0 and
later.
later.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Interpreting Event Logs
Click the Event Logs link in the Monitoring module in order to view syslog−based event logs in the admin
console. There are three Event Logs tabs:
console. There are three Event Logs tabs: