Cisco Cisco Email Security Appliance C170 Guia Do Utilizador

When physically transferring the appliance, you may want to start with factory defaults. The Reset 
Configuration section of the System Administration > Configuration File page, or the r

esetconfig

 

command, resets all AsyncOS configuration values to factory defaults. This command is extremely 
destructive, and it should only be used when you are transferring the unit or as a last resort to solving 
configuration issues. It is recommended you run the System Setup wizard or the 

systemsetup

 command 

after resetting the configuration. 

The 

resetconfig

 command only works when the appliance is in the offline state. When the 

resetconfig

 

command completes, the appliance returns to the online state, even before you run the 

systemsetup

 

command again. However, mail delivery will not be resumed; you will have to turn mail delivery back 
on. 

The 

resetconfig

 command will return all network settings to factory defaults, potentially disconnecting 

you from the CLI, disabling services that you used to connect to the appliance (FTP, Telnet, SSH, HTTP, 
HTTPS), and even removing additional user accounts you created with the 

userconfig

 command. Do 

not use this command if you are not able to reconnect to the CLI using the Serial interface or the default 
settings on the Management port through the default Admin user account.