Cisco Cisco Email Security Appliance C170 Guia Do Utilizador

After you have upgraded all the machines, use the reconnect operation of 
clusterconfig for each upgraded machine to reconnect it. For example, to 
reconnect the machine 

losangeles.example.com

, type 

clusterconfig 

reconnect

 

losangeles

.example.com

. Note that you can only connect a machine 

to a cluster that is running the same version of AsyncOS.

Configuration information may be saved for any individual system in the cluster. 
If you are in machine mode and you export a configuration file (using the System 
Administration > Configuration File page or the 

exportconfig

 command), the 

file will be exported onto the local disk of the machine you are currently 
configuring. If you are in cluster mode or group mode, then the file will be saved 
on the machine you are currently logged into. You will be notified which machine 
the file was exported to.

Saving the configuration of an entire cluster (or a clustered machine) prior to 
restoring that configuration onto a set of machines (either the same machines or a 
different set) via the System Administration > Configuration File page or the 

loadconfig

 command is not supported.

If the configuration is reset (via the System Administration > Configuration File 
page or the 

resetconfig

 command) on a machine (restricted to local machine 

mode) that is part of a cluster, then that machine will return to the default factory 
settings. If that machine was previously part of a cluster, resetting the 
configuration will also automatically remove it from the cluster.