Cisco Cisco Email Security Appliance C170 Guia Do Utilizador
A-5
Cisco IronPort AsyncOS 7.5 for Email Configuration Guide
OL-25136-01
Appendix A Accessing the Appliance
Step 8
Select whether or not to enable redirecting HTTP to HTTPS for appliance
management on the interface.
management on the interface.
Step 9
If you are using the IronPort Spam quarantine, you can select HTTP or HTTPS or
both and specify the port numbers for each. You can also select whether to redirect
HTTP requests to HTTPS. Finally, you can specify whether the IP interface is the
default interface for the IronPort Spam quarantine, whether to use the hostname
as the URL, or provide a custom URL.
both and specify the port numbers for each. You can also select whether to redirect
HTTP requests to HTTPS. Finally, you can specify whether the IP interface is the
default interface for the IronPort Spam quarantine, whether to use the hostname
as the URL, or provide a custom URL.
Step 10
Click Submit.
Step 11
Click the Commit Changes button, add an optional comment if necessary, and
then click Commit Changes to finish creating the IP interface.
then click Commit Changes to finish creating the IP interface.
FTP Access
To access the appliance via FTP, follow these steps:
Warning
By disabling services via the Network > IP Interfaces page or the
interfaceconfig command, you have the potential to disconnect yourself from
the GUI or CLI, depending on how you are connected to the appliance. Do not
disable services with this command if you are not able to reconnect to the
appliance using another protocol, the Serial interface, or the default settings on
the Management port.
interfaceconfig command, you have the potential to disconnect yourself from
the GUI or CLI, depending on how you are connected to the appliance. Do not
disable services with this command if you are not able to reconnect to the
appliance using another protocol, the Serial interface, or the default settings on
the Management port.
Step 1
Use the Network > IP Interfaces page (or the
interfaceconfig
command) to
enable FTP access for the interface.
In this example, the Management interface is edited to enable FTP access on
port 21 (the default port):
port 21 (the default port):