Cisco Cisco Email Security Appliance C170 Guia Do Utilizador

A name (nickname) created by you to refer to the IP interface later. For 
example, if you are using one Ethernet port for your private network and the 
other for the public network, you may want to name them PrivateNet and 
PublicNet, respectively.

The names you define for interfaces are case-sensitive. AsyncOS will not allow 
you to create two identical interface names. For example, the names 

 

and 

 are considered as two different (unique) names. 

The IP address assigned by your network administrator.

The netmask of the interface. The netmask can be in standard dotted decimal 
form or hexadecimal form.

IP addresses within the same subnet cannot be configured on separate physical 
Ethernet interfaces. See 

more detailed information on Network and IP Address configuration. 

For C10/100 customers, the Data 2 interface is configured first.

In the next portion of the 

systemsetup

 command, you type the IP address of the 

default router (gateway) on your network.

In the next portion of the 

systemsetup

 command, you enable the web interface 

for the appliance (for the Management Ethernet interface). You can also choose 
to run the web interface over secure HTTP (

https

). If you choose to use HTTPS, 

the system will use a demonstration certificate until you upload your own 
certificate. For more information, see “Enabling a Certificate for HTTPS” in the 
Cisco IronPort AsyncOS for Email Advanced Configuration Guide.