Cisco Cisco Email Security Appliance C170 Guia Do Utilizador
Chapter 3 Setup and Installation
3-54
Cisco IronPort AsyncOS 7.1 for Email Configuration Guide
OL-22158-02
Using the System Setup Wizard
The IronPort AsyncOS operating system provides a browser-based System Setup
Wizard to guide you through the five step process of system configuration. Also
included is a command line interface (CLI) version of the System Setup Wizard.
See
Wizard to guide you through the five step process of system configuration. Also
included is a command line interface (CLI) version of the System Setup Wizard.
See
for more information. Some users will want to take advantage of custom
configuration options not available in the System Setup Wizard. However, you
must use the System Setup Wizard for the initial setup to ensure a complete
configuration. If you have gathered the information required in
configuration options not available in the System Setup Wizard. However, you
must use the System Setup Wizard for the initial setup to ensure a complete
configuration. If you have gathered the information required in
, the configuration process will take less time to complete.
Warning
The System Setup Wizard will completely reconfigure your system. You should
only use the System Setup Wizard the very first time you install the appliance,
or if you want to completely overwrite your existing configuration.
only use the System Setup Wizard the very first time you install the appliance,
or if you want to completely overwrite your existing configuration.
Warning
The IronPort appliance ships with a default IP address of
192.168.42.42
on
the Management port of C60/600/650/660, C30/300/350/360, and X1000/1050/1060
systems, and the Data 1 port of C10/100 systems. Before connecting the IronPort
appliance to your network, ensure that no other device’s IP address conflicts
with this factory default setting. If you are configuring an IronPort M-Series
appliance, please see
systems, and the Data 1 port of C10/100 systems. Before connecting the IronPort
appliance to your network, ensure that no other device’s IP address conflicts
with this factory default setting. If you are configuring an IronPort M-Series
appliance, please see
.
If you are connecting multiple factory-configured IronPort appliances to your
network, add them one at a time, reconfiguring each IronPort appliance’s default
IP address as you go.
network, add them one at a time, reconfiguring each IronPort appliance’s default
IP address as you go.
McAfee Anti-Virus Scanning Engine
Enable / Disable
Sophos Anti-Virus Scanning Engine
Enable / Disable
Virus Outbreak Filters
Enable / Disable
Table 3-4
System Setup Worksheet: 1 IP Address for All Email Traffic