Cisco Cisco Email Security Appliance C170 Guia Do Utilizador

(Optional) View the Upgrade Logs. 

The ability to remotely reset the power for the appliance chassis is available only on the following 
hardware: C380 and C680. 

If you want to be able to remotely reset appliance power, you must enable and configure this 
functionality in advance, using the procedure described in this section. 

Cable the dedicated Remote Power Management port directly to a secure network. For information, 
see the Hardware Installation Guide. 

Ensure that the appliance is accessible remotely; for example, open any necessary ports through the 
firewall. 

This feature requires a unique IPv4 address for the dedicated Remote Power Management interface. 
This interface is configurable only via the procedure described in this section; it cannot be 
configured using the 

ipconfig

 command. 

In order to cycle appliance power, you will need a third-party tool that can manage devices that 
support the Intelligent Platform Management Interface (IPMI) version 2.0. Ensure that you are 
prepared to use such a tool. 

For more information about accessing the command-line interface, see the CLI reference guide. 

Use SSH or the serial console port to access the command-line interface. 

Sign in using an account with Administrator access. 

Enter the following commands: 

remotepower 

setup 

Follow the prompts to specify the following: 

The dedicated IP address for this feature, plus netmask and gateway. 

View download status

Look in the middle of the page. 

If there is no download in progress and no completed download 
waiting to be installed, you will not see download status information. 

Cancel a download 

Click the Cancel Download button in the middle of the page. 

This option appears only while a download is in progress. 

Delete a downloaded installer 

Click the Delete File button in the middle of the page. 

This option appears only if an installer has been downloaded.