Cisco Cisco Email Security Appliance C170 Guia Do Utilizador

NIC pairing allows you to combine any two physical data ports in order to provide a backup Ethernet 
interface if the data path from the NIC to the upstream Ethernet port should fail. Basically, pairing 
configures the Ethernet interfaces so that there is a primary interface and a backup interface. If the 
primary interface fails (i.e. if the carrier between the NIC and the upstream node is disrupted), the 
backup interface becomes active and an alert is sent. When the primary interface is up again, this 
interface will become active automatically. Within the documentation for this product, NIC pairing is 
synonymous with NIC teaming.

5. 100baseTX full-duplex

6. 1000baseTX half-duplex

7. 1000baseTX full-duplex

[1]> 5

Ethernet interfaces:

1. Data 1 (Autoselect: <100baseTX full-duplex>) 00:06:5b:f3:ba:6d

2. Data 2 (100baseTX full-duplex: <100baseTX full-duplex>) 00:06:5b:f3:ba:6e

3. Management (Autoselect: <100baseTX full-duplex>) 00:02:b3:c7:a2:da

Choose the operation you want to perform:

- EDIT - Edit an ethernet interface.

[]>

Choose the operation you want to perform:

- MEDIA - View and edit ethernet media settings.

- PAIRING - View and configure NIC Pairing.

- VLAN - View and configure VLANs.

- LOOPBACK - View and configure Loopback.

- MTU - View and configure MTU.

- MULTICAST - Accept or reject ARP replies with a multicast address.

[]>