Cisco Cisco Aironet 340 Ethernet Bridges Guia Do Utilizador

5.

Select the filename option and type the name of the firmware file 

you are retrieving (including drive and directory), then press 
ENTER.

If downloading from another Aironet 340 Series Bridge, the file-
name option must have a value even though the value is not used by 
the remote Aironet 340 Series Bridge.

6.

Select the get option. 

The unit will begin an FTP session to  the  host PC, retrieve the file, 
program the flash memory, and reboot. A message will appear:

Use the put option to upload (send) a copy of the currently running firm-
ware to another system. If the system is a: 

n PC or host: A copy of the firmware will be stored on the system’s 

disk, possibly for downloading to other units later. 

n Aironet 340 Series Bridge: The remote Aironet 340 Series Bridge 

will flash the new code and begin running it immediately. You can 
use one Aironet 340 Series Bridge to upgrade another Aironet 340 
Series Bridge.

Í To Upload Firmware using FTP:

1.

Select the dest option and type the IP address of the remote PC, host 

or Aironet 340 Series Bridge you are sending to. Press ENTER.

2.

Select the username option and type the username for the remote 

PC, host, or Aironet 340 Series Bridge you are sending to. Press 
ENTER.

If uploading to another Aironet 340 Series Bridge, the username 
option must have a value even though the value is not used by the 

220 sun_host FTP server (SunOS 4.1) ready.
230 User sysop logged in.
200 Type set to I.
200 PORT command successful.
150 Binary data connection for apv33.img (163056 bytes).
226 Binary Transfer complete.
221 Goodbye.
FTP: received 161056 bytes in 00:00:10; 15 Kbytes/s transfer rate

rebooting unit.