Cisco Cisco Aironet 340 Ethernet Bridges Guia Do Utilizador

Some configuration commands only allow the choice between two fixed 
values. When the menu item is selected, the opposite value to the cur-
rent value is chosen. For example, if the configuration item is only a 
selection between on and off, and the current value is on, then selecting 
the menu option will select the off value.

Some commands which have a severe effect on the operation of the unit 
(such as the restart command) and will prompt to be sure you want to 
execute the command.

Are you sure [y/n] :

If you enter anything other than a “y” or a “Y” the command will not be 
executed.

If you are being prompted for information, you may cancel the command 
and return to the menu by typing ESCAPE.

There are several types of commands that display information to the 
operator. All displays end with a prompt before returning back to the 
menus. If nothing is entered at the prompt for 10 seconds, the display 
will automatically refresh.

n Single page non-statistical displays end with the following prompt. 

Enter space to re-display, q[uit] : 

Any character other than space will cause the display to exit.

n Single page statistical displays end with the following prompt. 

Enter space to re-display, C[lear stats], q[uit] :

Entering a “C” (capital) will reset all statistics to zero.

n Multiple page table displays end with the following prompt. 

Enter space to redisplay, f[irst], n[ext], p[revi-

ous], q[uit] : 

Parts of the prompt may or may not be present depending on the dis-
play. If you are not at the first page of the display, you may enter “f” 
to return to the first page or “p” to return to the previous page. If 
you are not at the last page you may enter “n” to go to the next page.