Cisco Cisco Aironet 340 Ethernet Bridges Guia Da Instalação

Systems operating as a point-to-multipoint system or using non-directional antennas cannot 

exceed +36 dBm EIRP power requirement under any circumstances and do not require 

professional installation.

This class B Digital apparatus meets all the requirements of the Canadian Interference-Causing 

Equipment Regulations.

Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material 

broilleur du Canada.

This device complies with RSS-210 of Industry Canada. Operation is subject to the following 

two conditions: 1) this device may not cause harmful interference, and 2) this device must 

accept any interference received, including interference that may cause undesired operation.

The device is certified to the requirements of RSS-139-1 for 2.4 GHz spread spectrum devices. 

The use of this device in a system operating either partially or completely outdoors may require 

the user to obtain a license for the system according to the Canadian regulations. For further 

information, contact your local Industry Canada office.

This equipment has been tested and found to comply with the European Telecommunications 

Standard ETS 300.328. This standard covers Wideband Data Transmission Systems referred to 

in CEPT recommendation T/R 10.01.

This type accepted equipment is designed to provide reasonable protection against harmful 

interference when the equipment is operated in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency energy, and if not installed and used in 

accordance with the instruction manual, may cause harmful interference to radio 

communications.