Cisco Cisco TelePresence MX700 Nota De Lançamento
Known limitations
Cisco TelePresence System C/EX/SX/MX Series Software Release Notes
Page 17 of 194
- TMSSchedulerService
- TMSSNMPService
* Log into the TMS Web Interface, browse to the
system and do a ‘Force Refresh’. TMS should
communicate to the system properly and the error
message will clear.
* To minimize service abruption it will be beneficial to
upgrade all systems in one go, avoiding following the
above procedure for every endpoints you upgrade. A
future TMS version will resolve this condition negating
the need to restart the services.
Workaround to restore the release keys:
* Once TMS has restored communication with the
systems, upgrade the units one more time. This time
TMS will be able to communicate with the systems
when they boot up and set the release keys.
Note: Please read the resolved caveats section
Reference ID 85930 as well.
Note: The above issues are fixed for TMS 13.0
- TMSSNMPService
* Log into the TMS Web Interface, browse to the
system and do a ‘Force Refresh’. TMS should
communicate to the system properly and the error
message will clear.
* To minimize service abruption it will be beneficial to
upgrade all systems in one go, avoiding following the
above procedure for every endpoints you upgrade. A
future TMS version will resolve this condition negating
the need to restart the services.
Workaround to restore the release keys:
* Once TMS has restored communication with the
systems, upgrade the units one more time. This time
TMS will be able to communicate with the systems
when they boot up and set the release keys.
Note: Please read the resolved caveats section
Reference ID 85930 as well.
Note: The above issues are fixed for TMS 13.0
CSCtr32348
TANDBERG PrecisionHD
1080p Camera all SW
versions.
1080p Camera all SW
versions.
720p50, 720p30 and 720p25 output has no CRC
included for HD-SDI. Depending on the device you
connect the camera to, you may not get video using this
format. The Cisco C series codecs will support these
formats.
included for HD-SDI. Depending on the device you
connect the camera to, you may not get video using this
format. The Cisco C series codecs will support these
formats.
N/A
Ver. TC2.1.0 and above
Startup scripts will not work with Windows end-of-line.
You must use Unix end-of-line to be able to run multiple
commands. Most editors have the option to set which
format to use. If you use Notepad ++, you can set Unix
format in the Settings/Preferences menu.
You must use Unix end-of-line to be able to run multiple
commands. Most editors have the option to set which
format to use. If you use Notepad ++, you can set Unix
format in the Settings/Preferences menu.
N/A
Ver. Any
If you run cascaded cameras and the chained cameras
are running an old camera code, we have seen that
zoom only works when trying to control the chained
camera. The solution is to connect the cascaded
camera as the first camera in the chain so that the
camera is detected and upgraded by the codec. You
can also use the Ethernet upgrade method.
are running an old camera code, we have seen that
zoom only works when trying to control the chained
camera. The solution is to connect the cascaded
camera as the first camera in the chain so that the
camera is detected and upgraded by the codec. You
can also use the Ethernet upgrade method.
N/A
Ver. Any
HD-SDI may not work with cables shorter than 3
meters. This is due to a jitter issue.
meters. This is due to a jitter issue.
N/A
Ver.Any
If you turn off H.323 as the protocol but leave default
protocol as H.323, you will be unable to make outgoing
calls unless you edit the URI to include 'sip:' in front of
the number or change the default call protocol to SIP.
protocol as H.323, you will be unable to make outgoing
calls unless you edit the URI to include 'sip:' in front of
the number or change the default call protocol to SIP.
CSCts05791
Any
The following HDMI output formats: “1920*1200p60,
800*600 and 1920*1080p60 (CVR960H) reduced
blanking”, will run in DVI compatibility mode and hence
audio cannot be transmitted over HDMI when using this
resolution.
800*600 and 1920*1080p60 (CVR960H) reduced
blanking”, will run in DVI compatibility mode and hence
audio cannot be transmitted over HDMI when using this
resolution.
CSCtr32423
Ver. TC3.x and above
If you dial a TANDBERG 150 with SW version L5.1.1 or
older with encryption setting set to ‘on’, you may not get
audio in any direction.
older with encryption setting set to ‘on’, you may not get
audio in any direction.
N/A
TC3.0.0 and above
The Cisco TelePresence System codec C40/C60 (rev.
1), will not provide proper analogue VGA output for any
resolution of 1080 lines or more.
1), will not provide proper analogue VGA output for any
resolution of 1080 lines or more.