Cisco Cisco TelePresence MX700 Nota De Lançamento
Known limitations
Cisco TelePresence System C/EX/SX/MX Series Software Release Notes
Page 42 of 194
Known limitations
Cisco
Reference ID
Equipment
Summary
CSCud33527
Cisco TelePresence Touch 8 When switching/replacing a Touch panel on an MX or
EX series system, the main unit needs to be restarted
for the new Touch panel to pair. Factory resetting the
Touch panel does not help.
for the new Touch panel to pair. Factory resetting the
Touch panel does not help.
CSCts86782
EX90
Touch panel may not come up when upgrading from
TC3.1.x to TC5.x on EX90. Solution: Upgrade to TC4.x,
then upgrade to TC5.x
TC3.1.x to TC5.x on EX90. Solution: Upgrade to TC4.x,
then upgrade to TC5.x
CSCtw52376
C20, C40, C60, C90
The Cisco VCS Provisioning (TMS Agent) wizard is
available from the CT Touch 8 for the C20, C40, C60,
C90 and all other systems with such a codec inside, yet
only CTS EX60/90 and CTS MX200/300 are supported.
available from the CT Touch 8 for the C20, C40, C60,
C90 and all other systems with such a codec inside, yet
only CTS EX60/90 and CTS MX200/300 are supported.
CSCtu98598
C20
If the local microphone mute icon does not appear on
the screen, issue the API command: xConfiguration
SystemUnit Type: shared.
the screen, issue the API command: xConfiguration
SystemUnit Type: shared.
CSCtu99526
Any
There is a HW incompatibility between the C series
systems and some NEC monitors. So far this is seen
with:
NEC LCD4020
NEC P401
This incompatibility will cause the monitor to wake up
from sleep mode even if the codec is still in sleep. This
happens when the monitor is connected using a HDMI
to HDMI cable. A workaround is to use the DVI input on
the monitors.
systems and some NEC monitors. So far this is seen
with:
NEC LCD4020
NEC P401
This incompatibility will cause the monitor to wake up
from sleep mode even if the codec is still in sleep. This
happens when the monitor is connected using a HDMI
to HDMI cable. A workaround is to use the DVI input on
the monitors.
CSCtw60572
TC3-TC4.1.2
The increased call log list introduced in TC4.2 will
cause systems with Touch 8 to go into constant reboot
if downgraded to TC4.1 or less, if the call log is larger
than what is expected in TC4.1.
Workaround:
* Clear the call history before you downgrade.
* Factory default the system after downgrade if
it goes into constant reboot.
cause systems with Touch 8 to go into constant reboot
if downgraded to TC4.1 or less, if the call log is larger
than what is expected in TC4.1.
Workaround:
* Clear the call history before you downgrade.
* Factory default the system after downgrade if
it goes into constant reboot.
NA
TC5.x
CTS-MAN autodetection of endpoints:
Autodetection requires CTI monitoring to be enabled in
the device information on CUCM. This is available in:
Autodetection requires CTI monitoring to be enabled in
the device information on CUCM. This is available in:
UCM 8.6(1) Device Pack shipping in December
UCM 8.6(2) which is not qualified for CTS-MAN 1.8
Workaround: Manually add endpoints to CTS-MAN.
CSCts99218
CTMS 1.8.0
Initial release of CTMS 1.8.0 supports 720p only when
all endpoints are running TC5.0 or later.
all endpoints are running TC5.0 or later.
CSCtr32420
Any
The C series codecs, and units with such a codec
inside, do not meet the Cisco password policy. It is
highly recommended to set a password on the unit
during install using the API command: ‘systemtools
passwd’.
inside, do not meet the Cisco password policy. It is
highly recommended to set a password on the unit
during install using the API command: ‘systemtools
passwd’.
CSCtr32331
C20
A C20 participating in a MultiSite is not able to send the
following video formats in its main video channel:
1280*768, 1280*800 and 1440*900.
following video formats in its main video channel:
1280*768, 1280*800 and 1440*900.