Cisco Cisco Aironet 1130 AG Access Point

For more details, see the FCC Regulations Update: 

Layer-3 is not supported by this feature.

This feature provides the ability for autonomous access points to support Cisco Network Admission 
Control (NAC) when operating in Multiple Basic Service Set Identifier (MBSSID) mode.  More details 
on Cisco NAC can be found here: www.cisco.com/go/nac  More details on MBSSID can be found in the 
Cisco IOS Software Release 12.3(4)JA  product bulletin:

This section contains information you should keep in mind when installing 350, 1100, 1130, 1200, 1230, 
1240 series access points, and 1300 series outdoor access point/bridges.

This section provides information on installing 1100 and 1200 series access points in environmental air 
space, such as above suspended ceilings.

Cisco Aironet 1100, 1130, 1200, and 1240 Series Access Points provide adequate fire resistance and low 
smoke-producing characteristics suitable for operation in a building's environmental air space, such as 
above suspended ceilings, in accordance with Section 300-22(C) of the National Electrical Code (NEC) 
and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.

The power injector does not provide fire resistance and low smoke-producing characteristics and is not 
intended for use in extremely high or low temperatures or in environmental air spaces such as above 
suspended ceilings.

If you plan to mount a 1200 series access point with a 5-GHz radio in an area subject to environmental 
air space, Cisco recommends that you mount the access point horizontally so that its antennas point 
down. Doing so ensures that the access point complies with regulatory requirements for environmental 
air space with the 5-GHz radio installed.