Cisco Cisco Aironet 3500p Access Point Ficha De Dados
Wireless CleanAir Deployment Guide
Smart Business Architecture
Step 7:
On a Supported Windows platform with Cisco Spectrum Expert
Connect (4.0 or greater) installed, launch Spectrum Expert.
Figure 40.
Launch Spectrum Expert
Step 8:
Select the Radial Button Remote Sensor:
Step 8A:
Enter the IP address of the CleanAir access point
Step 8B:
Enter the Network Spectrum Interface Key of the CleanAir
access point.
Step 8C:
Step 8C:
Select either 2.4Ghz by selecting the b/g/n radial button or
the 5Ghz by selecting the a/n radial button.
Step 8D:
Step 8D:
Click OK.
Figure 41.
Enter Remote CleanAir Details
The connected Windows machine now connects to the remote CleanAir access
point on UDP port 37540 if you selected b/g or on UDP port 37550 if you selected
a/n during preceding setup. If connection problems occur, verify that you can
ping the CleanAir access point and that there are no port blocking network
devices that may be blocking the necessary UDP port information.
point on UDP port 37540 if you selected b/g or on UDP port 37550 if you selected
a/n during preceding setup. If connection problems occur, verify that you can
ping the CleanAir access point and that there are no port blocking network
devices that may be blocking the necessary UDP port information.
22