Cisco Cisco FastHub 412M 10 100 Repeater

This configuration caveat was resolved in Release 1.00.08:

CSCdw69907

The Cisco FastHub 400 is susceptible to Simple Network Management Protocol (SNMP) 
vulnerabilities. These vulnerabilities can be easily and repeatedly demonstrated with the use of the 
University of Oulu Secure Programming Group (OUSPG) “PROTOS” Test Suite for SNMPv1. The 
test suite is generally used to analyze a protocol and to produce messages that probe various design 
limits within an implementation of a protocol. Test packets containing overly long or malformed 
object identifiers and other combinations of exceptional values in various fields can be 
programmatically generated and then sent to a network device under test. The PROTOS test suite 
for SNMPv1, as distributed, contains approximately 53,000 individual test cases.

Further details are described in the advisory at this link:

http://www.cisco.com/warp/public/707/cisco-malformed-snmp-msgs-non-ios-pub.shtml

This problem was resolved in Release 1.00.06:

CSCdv15665

You no longer lose connectivity across the uplink module when moving to a new port on the same 
FastHub 400 or to a port on a different FastHub 400.

This problem was resolved in Release 1.00.04:

CSCdr79923

An enable password is no longer limited to less than eight characters. 

This problem was resolved in Release 1.00.03:

CSCdr17179

Using Cisco Discovery Protocol (CDP) with a FastHub 400M no longer occasionally locks the 
console. 

These documents provide complete information about the hub and are available from this Cisco.com 
site: 

FastHub 400 10/100 Series Cabling and Start Up (not orderable, but available on Cisco.com)

FastHub 400 10/100 Series Installation and Configuration Guide (order number DOC-785584=)