Cisco Cisco Packet Data Gateway (PDG) Guia Da Instalação

Chassis Installation

Re-Installing Chassis Components ▀

ASR 5500 Installation Guide ▄

Re-install the Rear Fan Trays

Lower Rear Fan Tray

Step 1

At the rear of the chassis, align the fan tray within the opening at the bottom rear of the chassis.

Step 2

With the unit resting on the bottom rail of the opening, slowly slide the fan tray into the chassis along the guides until it
is seated firmly in the midplane connectors.

Step 3

Reinstall the lower access cover.

Upper Rear Fan Tray

Step 1

Align the fan tray within the opening at the upper rear of the chassis.

Step 2

With the unit resting on the bottom rail of the opening, slowly slide the fan tray into the chassis along the guides until it
is seated firmly in the midplane connectors.

Step 3

Reinstall the upper access cover.

Re-install the Chassis Cover Panels

Front of Chassis

Step 1

Reinstall the top cover panel by aligning the cover over the balled posts on the fan tray access panel and above the PDF
bays. Push inwards to snap it in place.

Step 2

Reinstall the bottom cover panel by aligning the cover over the balled posts on the fan tray access panel and below the
air intake panel. Push inwards to snap it in place.

Rear of Chassis

Step 1

Reinstall the top cover panel by aligning the cover over the balled posts on the fan tray access panel. Push inwards to
snap it in place.

Step 2

Reinstall the bottom cover panel by aligning the cover over the balled posts on the fan tray access panel and below the
ground terminals. Push inwards to snap it in place.