Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
AAA Server Group Configuration Mode Commands
radius accounting ip remote-address ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
radius accounting ip remote-address
This command configures IP remote address-based RADIUS accounting parameters.
Product
PDSN, HA
Privilege
Security Administrator, Administrator
Syntax
Removes configuration for the specified keyword.
Enables collecting and reporting Remote-Address-Based accounting in RADIUS Accounting. This should be
enabled in the AAA Context. It is disabled by default.
enabled in the AAA Context. It is disabled by default.
Enters the Remote Address List Configuration mode. This mode configures a list of remote addresses that can
be referenced by the subscriber's profile.
be referenced by the subscriber's profile.
must be an integer from 1 through 65535.
Usage
This command is used as part of the Remote Address-based Accounting feature to both configure remote IP
address lists and enable the collection of accounting data for the addresses in those lists on a per-subscriber
basis.
Individual subscriber can be associated to remote IP address lists through the configuration/specification of
an attribute in their local or RADIUS profile. (Refer to the
address lists and enable the collection of accounting data for the addresses in those lists on a per-subscriber
basis.
Individual subscriber can be associated to remote IP address lists through the configuration/specification of
an attribute in their local or RADIUS profile. (Refer to the
command in the
Subscriber Configuration mode.) When configured/specified, accounting data is collected pertaining to the
subscriber‘s communication with any of the remote addresses specified in the list.
Once this functionality is configured on the system and in the subscriber profiles, it must be enabled by
executing this command with the collection keyword.
subscriber‘s communication with any of the remote addresses specified in the list.
Once this functionality is configured on the system and in the subscriber profiles, it must be enabled by
executing this command with the collection keyword.
Example