Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Crypto Map Manual Configuration Mode Commands
▀ set peer
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
set peer
Configures the IP address of the peer security gateway that the system will establish the IPSec tunnel with.
Product
PDSN, HA, GGSN, PDIF
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured peer address.
The IP address of the peer security gateway with which the IPSec tunnel will be established.
Usage
Once the manual crypto map is fully configured and applied to an interface, the system will establish an IPsec
tunnel with the security gateway specified by this command.
Because the tunnel relies on statically configured parameters, once created, it never expires; it exists until its
configuration is deleted.
tunnel with the security gateway specified by this command.
Because the tunnel relies on statically configured parameters, once created, it never expires; it exists until its
configuration is deleted.
Example
The following command configures a security gateway address of 192.168.1.100 for the crypto map to establish a tunnel
with.
The following command configures a security gateway address of 192.168.1.100 for the crypto map to establish a tunnel
with.